Chandelier Earrings Jewelry Making Project made with WigJig Tools, Glass Beads, Wire, and Jewelry Supplies

Step 7: Remove the wire from the jig and cut the excess wire. Close the final loop.	Step 7

Step 8: Now using your second three inch segment of 20 gauge wire place the loop in the wire over the left most peg as shown below, left. Wrap your wire around the top peg and down to the right most peg. Push your wire far enough, so that with your hands removed, the wire will stay in the position shown below left.

Step 9: Wrap your wire around the bottom right peg as shown below, center.

Step 10: Remove the wire from the jig and cut the excess wire. Close the final loop. When completed the wire should appear as shown below, right.

Wire Chandelier Earrings Jewelry Making Project step 8 made with WigJig tools, and jewelry supplies.
Step 8

Wire Chandelier Earrings Jewelry Making Project step 9 made with WigJig tools, and jewelry supplies.
Step 9

Wire Chandelier Earrings Jewelry Making Project step 10 made with WigJig tools, and jewelry supplies.
Step 10